How to Weather Strip Your Steel Door

Follow these steps to weather strip your steel door. This will help to keep the cold air out and the heat in.

Checkout this video:


Your home’s doors are your first line of defense against the elements, so it’s important to make sure they are properly sealed and insulated. If you have a steel door, you may be wondering how to weather strip it.

Here are a few tips to help you get started:

– start by removing the old weather stripping, if there is any, and cleaning the surface of the door;
– use a tape measure to accurately determine the size of the gap between the door and the frame;
– select the right type of weather stripping for your needs – there are several different options available, so be sure to do your research;
– cut the weather stripping to size and fit it into place;
– use a hammer or other tool to nail or staple the weather stripping into place;
– check that the door is sealing properly by closing it and checking for any light leaks.

If you follow these steps, you should be able to weather strip your steel door easily and effectively.

What You Need

-You will need a few materials to get started:
-First, you will need a door sweep. You can find these at any hardware store.
-Next, you will need some weather stripping. This can also be found at most hardware stores.
-You will also need a drill, screwdriver, and screws.
-Finally, you will need some caulk.


The first thing you need to do is to clean the door and the jamb. If the door is new, you can skip this step. If the door is old, you should remove any dirt, dust, and debris that has accumulated over time.

Next, you need to remove the old weather stripping. You can do this with a putty knife or a screwdriver. Be careful not to damage the door or the jamb as you remove the old weather stripping.

Once the old weather stripping has been removed, you should clean the door and the jamb again. This will ensure that the new weather stripping will adhere properly.

Weather Stripping the Door

Weather stripping is important for any door, but it’s especially crucial for steel doors. Steel doors are notorious for letting in drafts, which can not only make your home less comfortable, but also increase your energy bills. Luckily, weather stripping a steel door is a fairly simple process that anyone can do. Follow these steps and you’ll have a weather-tight door in no time.

1. Start by removing the old weather stripping. If there is any glue or other adhesive residue on the door, use a putty knife or similar tool to scrape it off. Be sure to clean the area thoroughly before moving on.

2. Next, measure the perimeter of the door and cut the new weather stripping to size. If you’re using self-adhesive weather stripping, simply peel off the backing and apply it to the door. For non-adhesive weather stripping, you’ll need to use glue or another type of adhesive to attach it to the door.

3. Once the weather stripping is in place, close the door and check for gaps. If you see any light coming through, simply adjust the Stripping until the gap is sealed.

Finishing Up

Now that you know how to weather strip your steel door, it’s time to finish up the job. Start by attaching the top and bottom weather stripping to the door using screws or nails. Make sure the strips are snug against the door so that they will seal properly. Then, attach the sides of the weather stripping using screws or nails. again, make sure the strips are snug against the door so that they will seal properly. Finally, attach the threshold weather stripping to the bottom of the door using screws or nails. Once again, make sure the strip is snug against the door so that it will seal properly.

Scroll to Top