If your steel door is jammed, don’t worry! In this blog post, we’ll show you how to fix a steel door that’s jammed in just a few easy steps.
Checkout this video:
Introduction
Few things are as frustrating as a door that won’t open. If you’re dealing with a steel door that’s jammed, there are a few potential causes and solutions. In this article, we’ll walk you through some of the most common reasons for steel doors becoming jammed, and how you can fix the issue.
Potential causes of a steel door becoming jammed include:
-The door is warped or bent, preventing it from opening or closing properly
-The hinges are loose or damaged, causing the door to jam when opened or closed
-The latch is not aligned correctly, causing the door to catch when opened or closed
-There is something blocking the path of the door, preventing it from opening or closing fully
To fix a steel door that’s jammed, you’ll need to:
-Check the alignment of the door and adjust as necessary
-Tighten any loose hinges
-Replace any damaged hinges
-Check for any obstructions blocking the path of the door and remove them
What You’ll Need
-1/2-inch drill bit
-Drill
-3/4-inch chisel
-Hammer
-Pry bar
-1/4-inch diameter x 4-inch long lag screw
-3/8-inch diameter flat washer
-Socket wrench or adjustable wrench
-Fine grain sandpaper
Steps to Take
If your steel door is jammed, you’ll need to take some steps to fix it. The first thing you’ll want to do is check the hinges. If they’re loose, tighten them with a screwdriver. If they’re not loose, then the problem is probably with the strike plate. The strike plate is what the latch enters when the door is closed. If it’s misaligned, then the door won’t close properly. To fix this, you’ll need to loosen the screws that hold the strike plate in place and adjust it until it’s in the right position. Once you’ve done that, re-tighten the screws and test the door.
Conclusion
In conclusion, it is important to remember that a steel door can become jammed for a variety of reasons. Whether it is due to weather changes, misalignment, or something else entirely, it is important to take the necessary steps to fix the problem as soon as possible. Doing so will ensure that your door functions properly and that you do not have to deal with any further issues.
